Startech 3PT PCIe x4 bővítőkártya - 1 x M.2 PCIe SSD / 2 x M.2 SATA SSD

Expand the storage and improve the performance of your computer, with slots for two M.2 SATA SSDs and one M.2 PCIe SSDSupports PCI Express 3.0 (x4), ideal for a high-performance M.2 PCIe SSD (NVMe)SATA slots feature a passthrough design, so your drives can connect to the SATA ports on your host PCMore Features . . .Full bandwidth is available for each M.2 drive simultaneously (up to approximately 40Gbps for M.2 PCIe drives, and up to 6Gbps for M.2 SATA III drives)Wide installation compatibility, with support for a range of M.2 drives (2280, 2260, 2242, 2230)Adjustable stand-offs and multiple mounting holes support 80 mm, 60 mm, 42 mm, and 30 mm SSDsOS independent with no drivers required, for a fast, hassle-free setupEquipped with a full-profile bracket, includes a low-profile (half-height bracket) for installation in small form-factor computersInstalls into x4, x8, or x16 PCIe slotsHardwareBus TypePCI ExpressCard TypeStandard Profile (LP bracket incl.)Industry StandardsSerial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)PCI Express 3.0InterfaceM.2 SATA (NGFF)SATAM.2 PCIe (NVMe)Port StyleIntegrated on CardPorts3PerformanceATAPI SupportYesBootableYesMTBF50,000 HoursPort MultiplierNoRAIDNoType and RateSATA III (6 Gbps)Connector(s)Connector Type(s)1 - PCI Express x4 MaleInternal Ports3 - M.2 (NGFF, B-Key) Receptacle2 - SATA (7 pin; Data) PlugSoftwareOS CompatibilityOS Independent; No additional drivers or software required

Note: When installed in a compatible operating system, the card is natively supported and doesn’t require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express).Special Notes / RequirementsNoteThe maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.System and Cable RequirementsA computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slotOne or two SATA host ports on the host computer (for example, the SATA controller card, or the motherboard SATA ports inside of your computer)An operating system that natively supports PCIe SSDs (NVMe), such as:
- Windows® 7 and later
- Mac OS 10.10.3 and laterIndicatorsLED Indicators3 - M.2 drive status/activity1 - PowerEnvironmentalHumidity20%~80% RH (Non-condensing)Operating Temperature5°C to 50°C (41°F to 122°F)Storage Temperature-25°C to 70°C (-13°F to 158°F)Physical CharacteristicsProduct Height120 mm [4.7 in]Product Length120 mm [4.7 in]Product Weight46 g [1.6 oz]Product Width20 mm [0.8 in]Packaging InformationShipping (Package) Weight122 g [4.3 oz]What's in the BoxIncluded in Package1 - 3-port M.2 NGFF SSD adapter card1 - low-profile bracket3 - M.2 mounting screws3 - M.2 mounting standoffs3 - M.2 mounting nuts1 - screwdriver1 - quick-start guide