SkyRC NC2500 Pro AA / AAA töltő

SkyRC NC2500 Pro AA / AAA töltő SkyRC NC2500 Pro AA / AAA töltő A SkyRC NC2500 Pro töltő nemcsak AA és AAA akkumulátorok töltését teszi lehetővé, hanem azok regenerálását is. A készülék többféle üzemmódot kínál, és további előnye a bejáratási funkció, amely lehetővé teszi a régóta nem használt modellmotorok bejáratását. Van egy USB-portja is, amely támogatja a QC 3.0 gyorstöltést, és a töltő 6 akkumulátorhellyel rendelkezik. Akár 4 elérhető funkció Az NC2500 Pro 4 működési módot kínál. Így nem csak tölteni, hanem kisütni vagy regenerálni is tudja a választott akkumulátorokat. Így meghosszabbítod az életüket! Befékező funkció is elérhető. Mindez lehetővé teszi, hogy optimalizálja akkumulátorai működését, gondoskodjon állapotukról, sőt megóvja őket a kopástól, sérüléstől! Töltsön fel 6 akkumulátort egyszerre With the NC2500 Pro you can charge up to 6 batteries simultaneously. The device is equipped with 6 slots and offers a maximum current of 2.5A. The charger also offers a special Step Charging mode, which allows you to adjust the amperage for successive charging steps. So you can take even better care of the condition of your batteries and enjoy their optimal performance! Easy operation Convenient operation of the device is enabled by a special dial. The charger is also equipped with an easy-to-read display, so you can check the current amperage, voltage and capacity for each channel at any time. On the screen you will also find information about the current operation mode and elapsed time. Just take a look! Effective protection against overheating Don't worry that your battery will overheat and be damaged. The charger uses an innovative FlexiPulse algorithm that prevents similar problems! When the device detects that the cell's internal resistance increases above a certain level during charging, it will automatically reduce the amperage to maintain the right temperature. In this way, it will protect the battery from overheating! Run-in function The NC2500 Pro is more than just a charger. The device offers an additional run-in function. It allows you to run-in model motors that have not been used for a long time. In this way you will prepare them for the next races and gain confidence that they will not let you down! Bet on proven solutions and achieve better and better results. Additional USB port - fast charging With the NC2500 Pro charger you can also charge your phone in a short time. The device is equipped with an additional USB port and supports QC2.0 / QC3.0 fast charging. It also provides voltage and current at 5V / 3A and 9V / 2A. This makes the charger perfect for a variety of scenarios. You no longer have to wait too long for your smartphone to be ready for use! In the box BD350 battery discharger / tester XT60 connection cable Brand SkyRC Model NC2500 Pro Input DC 12V / 3A Battery type NiMH / NiCD Battery size AA / AAA Charging intensity 0.1-2.5A Discharge current 0.1-1.5A Discharge cutoff voltage 0.8-1.0V (adjustable) USB output QC3.0 5V / 3A, 9V / 2A, 18W max ±5% - △V: 1-8mV (adjustable) Current (trickle) 30-99mA / OFF Temperature protection 55-65°C (adjustable) Operating temperature From 0°C to 40°C Ambient humidity during operation 0-75% Storage temperature From -10°C to 70°C Ambient humidity during storage 0-75% Kijelző LCD Méretek 148 x 135 x 65mm Súly 600g