Szélmérő UNI-T USB UT362

szélsebesség mérés: 2 - 10 m / s, 10 - 30m / s Hőmérsékletmérés: 0 ~ 40 ° C, 32 ~ 113 ° C A termék mérete: 162 x 78 x 30mm Müszaki leírás Angol Description The UNI-T UT362 USB anemometer is a small, stable and reliable hand-held instrument for measuring wind speed and temperature with a separate speed sensor, which ensures fast detection, low consumption and high accuracy. The anemometer enables automatic measurement at predetermined intervals of 0.5 to 255 seconds and storage of values ?in the internal memory in the number of up to 2044 records and later transfer to a computer via the USB interface. Large backlit display 57 mm x 37 mm, which simultaneously shows the speed and wind temperature. The device can be used in many areas - such as mining, petrochemicals, energy, navigation - in aviation and shipping, in the manufacture of fans or the installation of exhaust ventilation and air recuperation, and in sports. Power supply by alkaline battery 9V, automatic shutdown after about 10 minutes of inactivity, which can be deactivated. Product parameters: - wind speed measuring range: 0 ~ 30m/s - the instrument and the measuring handle are connected by a cable - durable fan shaft with ruby ?tips for higher accuracy and reliability - large selection of wind speed units (VEL): (m/s, km/h, ft/min, MPH, KNOTS) - selection of wind flow units (FLOW): CMM (cubic meter per second), CFM (cubic foot per minute) - wind speed measurement modes: MAX, MIN, real time - wind flow modes: MAX, 2/3 MAX, MIN, AVG, real time - temperature measurement range: 10°C ~ 40°C - selection of units: °C or °F - display backlight: yes - Data Hold: yes - automatic recording function with interval: 0.5 to 255 s - data storage: up to 2044 records - transfer of stored records to PC: yes Technical parameters: - wind speed measuring range: 2m ~ 10m/s, resolution 0.1m/s, accuracy ± (3% of measurement +0.5) - wind speed measuring range: 10m ~ 30m/s, resolution 0.1m/s, accuracy ± (3% of measurement +0.8) - wind flow measurement (CMM): 0.001 to 9999 x 100 - wind flow measurement (CFM): 0.001 to 9999 x 100 - sampling frequency: approx. 2 measurements per second - temperature measurement range: 10°C ~ 40°C, resolution 0.1°C, accuracy ± 3°C (32°F ~ 104°F, resolution 0.2°F, accuracy ± 4°F - measurement of maximum, minimum or average values: MAX / MIN / AVG is displayed - type of wind speed sensor: on the principle of magnetic induction - temperature sensor type: negative temperature coefficient, NTC - measurement pause: HOLD is displayed - data storage: 2044 records - USB interface: yes - display backlight: yes, can be switched on/off - automatic shut-off: yes, after 10 minutes of inactivity, can be deactivated for continuous operation - low battery indication: when the voltage drops to ≤ 7.2V - battery powered: 1 x 9V (6F22) - device dimensions: 162 mm x 78 mm x 30 mm - device weight: 375g - product color: red and gray - operating temperature and humidity: 0°C ~ 50°C (32°F to 122°F), (relative humidity less than 75%) - storage temperature and humidity: -20°C ~ 65°C (-4°F to 149°F) (relative humidity less than 75%) - pressure: 500 mB to 2 Bar Package contents: - anemometer UNI-T UT362 USB - battery 9V (6F22): 1pc - USB interface cable: 1pc - CD with software for PC - instructions for use